ccd signal processing module signal processing module for ccd area image sensor (s10810, s10811) C9266-03/-04 the C9266-03/-04 are signal processing circuit designed for hamamatsu ccd area image sensors s10810, s10811. the c9266- 03/-04 can be used in x-ray applications such as x-ray imaging and non-destructive inspection when combined with these ccd area image sensors. the C9266-03/-04 hold a ccd driver circuit, analog video signal processing circuit (12-bit a/d converter), timing generator, co n- trol circuit and power supply. the C9266-03/-04 convert analog video signals from a ccd into digital signals and outputs them. the usb connector (usb 2.0) provided as a standard feature easily connects to a pc for the C9266-03/-04 control and data acquisition. no additional power supply for C9266-03/-04 are needed since power is supplied from the pc through the usb con- nector. the C9266-03/-04 also have a 36-pin mdr connector for connection to a ccd. the C9266-03/-04 case is compact, light- weight and very easy to handle. application software (c9266dcamapl) that comes with the C9266-03/-04 allow easy operation from a pc running on windows 2000/xp. a function library (dcamlib.dll) included with the application software helps you to develop your own software. this software is available with dll to help you develop your own software programs under various developmental environments. 1 features applications control of x-ray ccd area image sensor (s10810, s10811) and data aquisition www.hamamatsu.com built-in 12-bit ad converter signal frequency: 1 mhz adjustable offset adjustable gain interface of computer: usb 2.0 power supply: usb bus power or dc +5 v (C9266-03) usb bus power (c9266-04) ccd area image sensor type no. number of pixels number of active pixels pixel size ( m) active area [mm (h) mm (v)] s10810 1508 1002 1500 1000 20 20 30 20 s10811 1708 1202 1700 1200 20 20 34 24 applicable ccd area image sensors the table below shows ccd area image sensors applicable for C9266-03/-04. since the C9266-03/-04 do not include a ccd area image sensor, so select the desired sensor and order it separately.
ccd signal processing module C9266-03/-04 2 specifications (typ. ta=25 c, unless otherwise noted) parameter condition ccd area image sensor unit s10810 s10811 scanning 1 mhz frame readout time 1.62 2.18 s data transfer time 1.62 2.17 s total transfer time 1.62 2.18 s a/d conversion resolution 4095adu 12 bit conversion gain 48.8 e - /adu readout noise 7 adu dynamic range 585 - current consumption 350 max. ma storage temperature -20 to + 70 c operating temperature 0 to + 50 c operating humidity no condensation 70 max. % dimension 32 (h) 115 (w) 125 (d) mm weight C9266-03 approx. 200 g c9266-04 approx. 170 internal synchronous mode (?int? mode) external trigger mode 1, 2 (?ext.edge 1, 2? mode) exposure time trigger in (software) exposure signal p1v/p2v p1h/p2h a/d conversion data acqusition time data transfer (usb 2.0) data transfer time data transfer (usb 1.1) data transfer time kaccc0510ea exposure time exposure signal p1v/p2v p1h/p2h a/d conversion data transfer (usb 2.0) data acquisition time data transfer time dummy scan external trigger in ext.edge 1: from sensor ext.edge 2: from bnc ( ) data transfer (usb 1.1) note: ?ext.edge 2? mode is not usable in the c9266-04 because there is not a bnc connector. data transfer time kaccc0511ea timing chart
ccd signal processing module C9266-03/-04 C9266-03 kacca0270ea dimensional outlines (unit: mm) 115 125 32 usb ext.trig power dc 5 v ccd external trigger mode 3, 4 (ext.level 1, 2? mode) exposure time exposure signal p1v/p2v p1h/p2h a/d conversion data acqusition time data transfer time dummy scan data transfer (usb 2.0) data transfer (usb 1.1) note: ?ext.level 2? mode is not usable in the c9266-04 because there is not a bnc connector. data transfer time external trigger in ext.level 1: from sensor ext.level 2: from bnc ( ) kaccc0512ea 3
ccd signal processing module C9266-03/-04 c9266-04 kacca0191eb 115 125 32 usb ccd pin connections ccd connector (3m 10236-5202jl, 36-pin female) pin no. signal name voltage (amplitude) pin no. signal name voltage (amplitude) 1 gnd +8 v 19 nc 2 vcc +13 v 20 p2h 0 v/+12 v 3 sg 0 v/+12 v 21 nc 4 trigger +8 v/+13 v 22 p1h 0 v/+12 v 5 rg 0 v/+12 v 23 nc 6 nc 24 gnd +8 v 7 og +11 v 25 nc 8 nc 26 rd +20 v 9 rd +20 v 27 nc 10 nc 28 od +23 v 11 od +23 v 29 nc 12 nc 30 gnd +8 v 13 out 31 nc 14 nc 32 out 15 gnd +8 v 33 nc 16 nc 34 p2v 0 v/+12 v 17 p1v 0 v/+12 v 35 nc 18 nc 36 tg 0 v/+12 v 4
cat. no. kacc1174e01 jan. 2010 dn www.hamamatsu.com information furnished by hamamatsu is believed to be reliable. however, no responsibility is assumed for possible inaccuracies or omissions. specifications are subject to change without notice. no patent rights are granted to any of the circuits described herein. type numbers of products listed in the specification sheets or supplied as samples may have a suffix ?(x)? which means tentativ e specifications or a suffix ?(z)? which means developmental specifications. ?2010 hamamatsu photonics k.k. hamamatsu photonics k.k., solid state division 1126-1 ichino-cho, higashi-ku, hamamatsu city, 435-8558 japan, telephone: (81) 53-434-3311, fax: (81) 53-434-5184 u.s.a.: hamamatsu corporation: 360 foothill road, p.o.box 6910, bridgewater, n.j. 08807-0910, u.s.a., telephone: (1) 908-231-0 960, fax: (1) 908-231-1218 germany: hamamatsu photonics deutschland gmbh: arzbergerstr. 10, d-82211 herrsching am ammersee, germany, telephone: (49) 8152- 375-0, fax: (49) 8152-265-8 france: hamamatsu photonics france s.a.r.l.: 19, rue du saule trapu, parc du moulin de massy, 91882 massy cedex, france, teleph one: 33-(1) 69 53 71 00, fax: 33-(1) 69 53 71 10 united kingdom: hamamatsu photonics uk limited: 2 howard court, 10 tewin road, welwyn garden city, hertfordshire al7 1bw, unit ed kingdom, telephone: (44) 1707-294888, fax: (44) 1707-325777 north europe: hamamatsu photonics norden ab: smidesv?gen 12, se-171 41 solna, sweden, telephone: (46) 8-509-031-00, fax: (46) 8 -509-031-01 italy: hamamatsu photonics italia s.r.l.: strada della moia, 1/e, 20020 arese, (milano), italy, telephone: (39) 02-935-81-733, fax: (39) 02-935-81-741 ccd signal processing module C9266-03/-04 example of sample software (c9266dcamapl) on pc screen ?power? connector (dc power jack: compatible with eiaj rc5320a, voltage class ?2?) connection kaccc0513ea there is not an connector in the c9266-04. -+ refer to the following diagram to connect hardware peripherals. kaccc0514ea kaccc0519ea dc power supply or ac adapter there is not the bnc connector, the power switch and the power input connector in the c9266-04. pulse generator or x-ray unit usb 2.0 usb dc +5.0 v ext.trig power dc 5 v pc 5 front panel rear panel ccd s10810, s10811 ccd os: windows2000/xp
|
